IDB Series 
Applications and installation 

These pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves. 
For the correct functioning of the pump, use to pump clean water, or non-aggressive liquids only, without sand or other solid impurities. 
They are qualified in domestic fitting, to increase the system pressure in aqueducts and for automatic water distribution by auto calve tanks and by hydrosphere units. 
Pumps should be installed in a covered area, protected against the weather. 
Operating limitations 
Liquid temperature up to 60? /SPAN> 
Ambient temperature up to 40? /SPAN> 
Total suction lift up to 9m 
Continuous duty 
Construction features 

Pump Body: Cast Iron 
Impeller: Brass 
Mechanical Seal: Carbon / Ceramic / Stainless Steel 
Motor Housing: Aluminum 
Shaft: Carbon Steel / Stainless Steel 
Insulation: Class B / Class F 
Protection: IP44 / IP54 
Thermal protector (if required)